Topic: Snow Performance Boost Cooler (Read 810 times)

lpshade · « **on:** February 11, 2009, 09:10:05 AM »

I have a stage 2 1.8T boost cooler never installed (box opened once to look at the contents) w/ 4 gallons of boost juice. I paid 350.00 for the kit and juice, I'm sell it for 275.00. PM me if you are interested or email me at wallacekls@msn.com

Kit includes:

• Digital MAF referenced controller
• 150+ psi pump for the most in pressure and volume
• Bulkhead fitting required to tap into factory washer reservoir
• 8 feet of tubing
• 2 nozzles to cover a wide range of horsepower
• All required hardware needed for installation
• 1.8T specific instructions for ease of installation

LOS · « **Reply #1 on:** February 11, 2009, 09:16:00 AM »

Greg, will this work on my vr or is there a different kit I need?

lpshade · « **Reply #2 on:** February 15, 2009, 03:07:19 PM »

greggearhead · « **Reply #3 on:** February 15, 2009, 05:18:12 PM »

Quote from: LOS on February 11, 2009, 09:16:00 AM

Greg, will this work on my vr or is there a different kit I need?

Yeppers. It injects according to the 0-5V MAF signal, or the boost- you can choose which on the controller. With your Vortech blower, I would use boost.

Barry · « **Reply #4 on:** February 15, 2009, 05:49:37 PM »

I'll give you $50, a "whereskenny.co m" t-shirt, and a half eaten/moldy bolonga sandwhich....

lpshade · « **Reply #5 on:** February 15, 2009, 06:46:37 PM »

Quote from: GotMyDub on February 15, 2009, 05:49:37 PM

I'll give you $50, a "whereskenny.co m" t-shirt, and a half eaten/moldy bolonga sandwhich....

NO!, how about that?

Smokestack · « **Reply #6 on:** February 15, 2009, 09:49:40 PM »

If Carlos doesn't pick this up from you, I will.

LOS · « **Reply #7 on:** February 16, 2009, 09:12:04 AM »

Ken, let me see if I can get the fundage together in the next few days, if not sell it to chris. I dont wanna hold you back.

Barry · « **Reply #8 on:** February 16, 2009, 10:20:09 AM »

i thought my offer was pretty valid

LOS · « **Reply #9 on:** February 16, 2009, 11:54:21 AM »

You gotta have the pocket lint quasimoto... that makes all the difference.

lpshade · « **Reply #10 on:** February 16, 2009, 02:59:14 PM »

Carlos let me know at the Thrusday meeting if you can pick it up, if not then Chris it's yours

Smokestack · « **Reply #11 on:** February 16, 2009, 03:07:03 PM »

Quote from: lpshade on February 16, 2009, 02:59:14 PM

Carlos let me know at the Thrusday meeting if you can pick it up, if not then Chris it's yours

Just bring it with you to the meeting if Carlos doesn't buy it.

lpshade · « **Reply #12 on:** February 16, 2009, 03:13:42 PM »

Barry · « **Reply #13 on:** February 16, 2009, 03:55:49 PM »

Quote from: LOS on February 16, 2009, 11:54:21 AM

You gotta have the pocket lint quasimoto... that makes all the difference.

I got pocket lint...

punkrider99 · « **Reply #14 on:** February 17, 2009, 10:36:26 AM »

um ken's unit doesn't inject based off of boost. his injects off of maf only. i sold it to him long before the dual function controllers came out. not going to work for you carlos.

btw ken sorry for being a slacker and never helping you install this thing. my bad.

LOS · « **Reply #15 on:** February 17, 2009, 11:08:26 AM »

Alright well then chris its yours.

punkrider99 · « **Reply #16 on:** February 17, 2009, 11:16:14 AM »

won't work for chris either. the mkv's use a digital maf sensor that has a frequency output. this snow perf controller is analog and reads voltage. bummer.

lpshade · « **Reply #17 on:** February 17, 2009, 11:24:03 AM »

Quote from: punkrider99 on February 17, 2009, 10:36:26 AM

um ken's unit doesn't inject based off of boost. his injects off of maf only. i sold it to him long before the dual function controllers came out. not going to work for you carlos.

btw ken sorry for being a slacker and never helping you install this thing. my bad.

All good, i just want it to go to a good home now. Well Chris it looks like you might be out of luck too - damn it!

Barry · « **Reply #18 on:** February 17, 2009, 11:24:47 AM »

So it looks like my standing offer is the best one on the table...

although, I have to say you didnt act fast enough Ken... I threw the moldy sandwhich away last night

heh heh heh

Smokestack · « **Reply #19 on:** February 17, 2009, 11:25:34 AM »

Quote from: punkrider99 on February 17, 2009, 11:16:14 AM

won't work for chris either. the mkv's use a digital maf sensor that has a frequency output. this snow perf controller is analog and reads voltage. bummer.

Do you remember how much the controller costs?

punkrider99 · « **Reply #20 on:** February 17, 2009, 11:33:59 AM »

can't say that i do. best bet is to ask getter dunn.

LOS · « **Reply #21 on:** February 17, 2009, 01:26:40 PM »

They might let you swap controllers maybe for a lil fee?
Chris, I got too much stuff on my plate right now financially so Im out either way, if you can make it work for you some how, its all yours. If not ken, pop that bad boy in the mk4 forum on the tex...

Smokestack · « **Reply #22 on:** February 17, 2009, 01:37:56 PM »

Quote from: LOS on February 17, 2009, 01:26:40 PM

They might let you swap controllers maybe for a lil fee?
Chris, I got too much stuff on my plate right now financially so Im out either way, if you can make it work for you some how, its all yours. If not ken, pop that bad boy in the mk4 forum on the tex...

Since I'm not chipped, I don't need much more than a stage 1 right now if I use one at all. I doubt SP would want to trade an old version controller that isn't even being used for a new one. Looking at the price differences between STG1 and STG 2, my guess on a new controller bought outright is going to be somewhere around $200+ dollars. I may as well pass this up seeing how I'd have to dump more money (comperable to a new STG 2 2.0 FSI kit) into it and let a MK4 guy have a great deal. Frees me up to snag a 3" exhaust I've been drooling over on the tex.

LOS · « **Reply #23 on:** February 17, 2009, 01:40:54 PM »

What are you gonna do barry? Put it on the 4jogger?

Barry · « **Reply #24 on:** February 17, 2009, 03:12:37 PM »

Quote from: LOS on February 17, 2009, 01:40:54 PM

What are you gonna do barry? Put it on the 4jogger?

yeah... thats what I'd be doing with it...

Or it could go on the mustang too...

News:

Author Topic: Snow Performance Boost Cooler (Read 810 times)

punkrider99

punkrider99

punkrider99